您好,欢迎进入上海力敏实业有限公司网站!
一键分享网站到:
您现在的位置:首页 >> 产品中心 >> 生化试剂、抗体、血清 >> 常规生化试剂 >> B23111 B23112BIOTOOL代理 Poly FlAG多肽

BIOTOOL代理 Poly FlAG多肽

  • 更新时间:  2015-12-16
  • 产品型号:  B23111 B23112
  • 简单描述
  • BIOTOOL代理 Poly FlAG多肽
    The Poly DYKDDDDK (FLAG) Peptide lyophilized powder was synthesized by 23 amino acid residues with molecular weight 2,864 Da. The Asp-Tyr-Lys-Xaa-Xaa-Asp motif is repeated three
详细介绍

BIOTOOL代理 Poly FlAG多肽

Properties

Appearance (Color)White
Appearance (Form)Powder
FormLyophilized Powder
Purity by HPLC-MS95.33 % (the latest lot) Poly FLAG Peptide lyophilized powder
Concentration(Recommended working concentration is 100-400 μg/mL for elute FLAG fusion proteins from the Biotool Anti-DYKDDDDK (FLAG) affinity gel.
Shipped inBlue ice
Storage Temperature2-8°C

Application

For use in competitive elution of DYKDDDDK (FLAG) fusion proteins from the ANTI-FLAGmonoclonal antibody in solution or bound to agarose on the Biotool Anti-DYKDDDDK (FLAG) affinity gel.

Attention

1. Read the User Manual carefully before the first use;
2. Avoid freezing, drying and high-speed centrifugation during use and storage of beads;
3. This product is for R&D use only, not for drug, household, or other uses. Please consult the Material Safety Data Sheet for information regarding hazards and safe handling practices.

Procedure

Peptide Elution of DYKDDDDK(FLAG) Fusion Protein from Biotool Anti-DYKDDDDK(FLAG) affinity gel

1. Thoroughly suspend the Anti-Flag Affinity Gel in the vial, for a uniform suspension of the resin. Quickly transfer 10μl of the gel suspension (about 5μl of packed gel volume) to a fresh tube.

2. Add 0.6 mL TBS. Thoroughly suspend the Anti-Flag Affinity Gel by pipetting. Centrifuge the resin at 5000 rpm for 30 secondsand carefully remove the supernatant. Be sure to remove all of the wash buffer without discarding the resin. Repeat 3-4 times.

3. Add 500 μL of cell periplasmic extracts to the washed resin.

4. Gently agitate samples for 2 hours at 4°C.
5. Centrifuge the resin for 30 seconds at 5000 rpm. Transfer the supernatants to a fresh tube.
6. Wash the resin with 0.5mL TBS until the OD280 of the supernatant reads<0.05.
7. Elution of DYKDDDDK (FLAG) Fusion Protein by Competition with Poly DYKDDDDK (FLAG) Peptide. Elute the bound DYKDDDDK(FLAG) Fusion Proteinby competitive elution with five one-column volume aliquots of a solution containing 100-400 ug/mL Poly DYKDDDDK(FLAG) Peptide in TBS. 
8. Recycling the Biotool Anti-DYKDDDDK(FLAG) affinity gel
Poly DYKDDDDK(FLAG) Peptidemay not elute all of the DYKDDDDK(FLAG) Fusion Protein bound to Biotool Anti-DYKDDDDK(FLAG) affinity gel. It is recommended the Biotool Anti-DYKDDDDK(FLAG) Affinity gel be regenerated immediay after use by washing with three 5 mL aliquots of 0.1 M glycine HCl, pH 3.5. The gel should be immediay re-equilibrated in TBS until the effluent is at neutral pH. 
Note: Do not leave the Biotool Anti-DYKDDDDK(FLAG) Affinity gel in glycine HCl for longer than 20 minutes.
9. Storing the Biotool Anti-DYKDDDDK(FLAG) Affinity gel
Wash the Biotool Anti-DYKDDDDK(FLAG) Affinity gel three times with 5 mL of 50% glycerol with 10mM sodium phosphate, 150 mM sodium chloride, pH 7.4, containing 0.02% (w/v) sodium azide. then add another 5 mL of 50% glycerol with 10 mM sodium phosphate, 150 mM sodium chloride, pH 7.4, containing 0.02% (w/v) sodium azideand store at -20°C without draining.

Storage & stability

Store the product at 2-8°C.

File Download

Poly FLAG Peptide lyophilized powder

购买此商品的顾客也同时购买

HA多肽

HA多肽

c-Myc多肽

c-Myc多肽

V5多肽

V5多肽

Anti-DYKDDDDK(Flag)亲和凝胶

Anti-DYKDDDDK(Flag)亲和凝胶

Anti-HA亲和凝胶

Anti-HA亲和凝胶

Anti-Myc亲和凝胶

Anti-Myc亲和凝胶

Anti-V5亲和凝胶

Anti-V5亲和凝胶

抑制剂Cocktails

抑制剂Cocktails

蛋白纯化和免疫沉淀的磁珠系列

蛋白纯化和免疫沉淀的磁珠系列

Graphene Oxide

Graphene Oxide

 

 

BIOTOOL代理 Poly FlAG多肽

订购信息:

 

B23111 4mg

B23112 25mg


留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
    QQ在线客服
  • 点击这里给我发消息
  • 点击这里给我发消息
电话
021-54631172
手机
15801836589
微信扫一扫
扫一扫访问手机站扫一扫访问手机站
访问手机站