您好,欢迎进入上海力敏实业有限公司网站!
一键分享网站到:
您现在的位置:首页 >> 产品中心 >> 生化试剂、抗体、血清 >> 常规生化试剂 >> H-1200Vector防荧光萃灭封片剂H-1200 VECTASHIELD Mounting Medium w

Vector防荧光萃灭封片剂H-1200 VECTASHIELD Mounting Medium w

  • 更新时间:  2023-07-25
  • 产品型号:  H-1200
  • 简单描述
  • Vector防荧光萃灭封片剂H-1200 VECTASHIELD Mounting Medium with DAPI
    产品名称:VECTASHIELD含有DAPI的封片剂
    别名:VECTASHIELD Mounting Medium with DAPI
    美国Vector labs产品货号|编号:Vector labs H-1200
详细介绍

Vector防荧光萃灭封片剂H-1200 VECTASHIELD Mounting Medium with DAPI
产品名称:VECTASHIELD含有DAPI的封片剂
别名:VECTASHIELD Mounting Medium with DAPI
美国Vector labs产品货号|编号:Vector labs H-1200

Vector防荧光萃灭封片剂H-1200 VECTASHIELD Mounting Medium with DAPI

Vector H-1000: 
Mounting Medium, 400张/10ml 防荧光萃灭效果尤好,长期保存。 FITC,Texas Red,Rhodamine,AMCN等。Vector H-1000实物图见上图。

Vector H-1200: 
Mounting Medium with DAPI,含DAPI 400张/10ml ,防荧光萃灭;含DAPI,可衬染细胞核;用于ISH或衬染DNA的实验。 PE,FITC等。Vector H-1200实
物图与Vector H-1000几乎一样,可参考上图。

Vector H-1300:
含PI 400张/10ml ,防荧光萃灭;含PI,可衬染细胞核;用于ISH或衬染DNA的实验。 FITC等。

Vector H-1400: 
HardSet Mounting Medium, 400张/10ml 凝固性;防荧光萃灭;适于油镜观察。 FITC,Texas Red,Rhodamine等。

Vector H-1500: 
HardSet Mounting Medium with DAPI, 400张/10ml 凝固性;防荧光萃灭;含DAPI,可衬染细胞核,用于ISH或衬染DNA的实验;适于油镜观察。 FITC,Texas Red,含DAPI Rhodamine等。

Vector H-5000:
Permanent Mounting Medium ,240张/60ml 非水溶性,无毒、无味;清晰;和底物BCIP/NBT联用,可将结晶减至zui小。长期保存。 HRP和AP的底物。

Vector H-5501:
AQ Aqueous Mounting Medium ,240张/60ml 水溶性,适于反应产物为酒精或其它有机溶剂溶性的底物。 大多数HRP和AP的底物如AEC,DAB, BCIP/NBT, Vector SG.

 

ith DAPI

详细信息:

VECTASHIELD? Mounting Media are unsurpassed in preventing photobleaching. The different formulations of VECTASHIELD? Mounting Media all offer the same outstanding anti-fade and anti-photobleaching properties. They are all compatible with fluorescein, Texas Red?, AMCA, DyLight? dyes, Alexa Fluor? dyes, fluorescent nuclear stains, fluorescent proteins, fluorescent tracers, histochemical stains, and most fluorochromes.

Features of VECTASHIELD? Mounting Media:
 
  • Inhibit photobleaching of most fluorochromes
    • Available in non-hardening or hardening formulations
      • Available with or without DAPI or propidium iodide
        • No warming necessary
          • Slides can be viewed after prolonged storage
            • Continues to inhibit photobleaching after prolonged storage of mounted slides
              • Easy to use
                • Optically clear
                • Ideal refractive index

                  The original VECTASHIELD? Mounting Medium is a glycerol-based, aqueous mountant that does not solidify but remains a viscous liquid on the slide. After mounting, coverslipped slides will not readily dry out and can be reviewed for weeks afterwards without sealing. For prolonged storage, coverslips can be permanently sealed around the perimeter with nail polish. Mounted slides should be stored at 4 oC.

                  Both the VECTASHIELD? HardSet? and the original VECTASHIELD? Mounting Media are available with or without the counterstain DAPI (4’, 6-diamidino-2-phenylindole). DAPI produces a blue fluorescence when bound to DNA with excitation at about 360 nm and emission at 460 nm.

                  VECTASHIELD? Mounting Media are compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. Please consult the compatibility table (located in product information box) to determine if VECTASHIELD? will be compatible in your system.

                  Please note: VECTASHIELD? Mounting Medium may not be compatible with all enzymatic substrates or fluorescent proteins and test sections would be advisable when using anything other than commonly used fluorochromes.

                  The refractive index for VECTASHIELD? Mounting Medium is 1.44.

                  1R.J. Florijn, et. al. Cytometry, 19 (1995) 177-182.

                  VECTASHIELD? Mounting Medium Antifade Comparison 

                  Other manufacturers measure the antifade properties of their mountants using labeled microspheres or arrayed spots. Vector Labs prefers to measure antifade properties of VECTASHIELD? mountants using frozen tissue sections immunohistochemically stained with fluorescently labeled secondary antibodies. 

                  Antifade capability is measured using a 40x objective with real time imaging over 30 seconds of continuous exposure to the excitation illumination. Individual intensity measurements are recorded from 6 separate labeled regions and the average is calculated. The intensity after 30 second exposure is expressed as a percentage of the intensity at zero time. The values for PG are taken from the manufacturer’s published results.

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7